Monday, June 15, 2009

SWING BOWLING


Swing bowling is a technique used for bowling in the sport of cricket. Practitioners are known as swing bowlers. Swing bowling is generally classed as a subtype of fast bowling.
The essence of swing bowling is to get the cricket ball to deviate sideways as it moves through the air towards or away from the batsman. In order to do this, the bowler makes use of four factors:

The raised seam of the cricket ball
Asymmetry in the ball caused by uneven wear of its surface
The speed of the delivery
The bowler's action
The asymmetry of the ball is encouraged by the constant polishing of one side of the ball by members of the fielding team, while allowing the opposite side to deteriorate through wear and tear. Over time, this produces a marked difference in the aerodynamic properties of the two sides.

At speeds around 80 mph (around 130 km/h), the airflow around the ball is in transition between smooth, or laminar flow, and turbulent flow. At speeds of 90 mph (around 145 km/h) and above, all the flow is turbulent. A medium-pace bowler, working at 75 to 80 mph (around 120 to 130 km/h), takes advantage of this. In this critical region, the raised seam and other minor imperfections in the ball's surface can induce turbulence while air flowing over other parts of the ball remains laminar. Turbulent air separates from the surface of the ball later than laminar flow air, so that the separation point moves to the back of the ball on the turbulent side. On the laminar flow side it remains towards the front. The result is a net force in the direction of the turbulent side.

Thus by keeping the seam and roughness to one side, the bowler induces the ball to swing in that direction. Skilled bowlers can even make a ball swing one way, and then 'break' the other way upon bouncing, with an off cutter or leg cutter hand action.

The swing of a cricket ball is not caused by the Magnus effect, which gives rise to a force perpendicular to the axis of rotation (in this case up or down). The deviation of a swinging cricket ball is parallel to the axis of its rotation

Conventional swing

Typically, a swing bowler aligns the seam and the sides of the ball to reinforce the swing effect. This can be done in two ways:

Outswinger: An outswinger to a right-handed batsman can be bowled by aligning the seam slightly to the left towards the slips and placing the roughened side of the ball on the left. To extract consistent swing, a bowler can also rotate his wrist toward the slips while keeping his arm straight. To a right-handed batsman, this results in the ball moving away to the off side while in flight, usually outwards from his body.
Inswinger: An inswinger to a right-handed batsman can be bowled by aligning the seam slightly to the right and placing the roughened side of the ball on the right and towards leg slip. To extract consistent swing, a bowler can also rotate or "open up" his wrist towards leg slip. To a right-handed batsman, this results in the ball moving in to the leg side while in flight, usually inwards towards his body.
The curvature of swing deliveries can make them difficult for a batsman to hit with his bat. Typically, bowlers more commonly bowl outswingers, as they tend to move away from the batsman, meaning he has to "chase" the ball in order to hit it. Hitting away from the batsman's body is dangerous, as it leaves a gap between the bat and body through which the ball may travel to hit the wicket. Also, if the batsman misjudges the amount of swing, he can hit the ball with an edge of the bat. An inside edge can ricochet on to the wicket, resulting in him being out bowled, while an outside edge can fly to the wicket-keeper or slip fielders for a catch.

An inswinger presents relatively fewer dangers to the batsman, but can result in bowled or leg before wicket dismissals if the batsman misjudges the swing on the ball.

An inswinger combined with a yorker can be especially difficult for the batsman to defend against, especially if used as a surprise delivery after a sequence of outswingers.

It is a common belief amongst both players and fans that balls swing more in humid weather conditions, although no objective research exists to bear this out. There has been a distinct lack of left-arm swing bowlers in the game. Some of the more famous left-arm bowlers were Pakistan's Wasim Akram and Australia's Alan Davidson

Reverse swing

Pioneers and notable practitioners of reverse swing have mostly been Pakistani fast bowlers. Former Pakistan international Sarfraz Nawaz was the founder of reverse swing during the late 1970s, and he passed his knowledge on to former team-mate Imran Khan, who in turn taught the duo of Wasim Akram and Waqar Younis. The English pair of Andrew Flintoff and Simon Jones are also well known for the ability to reverse swing the ball having been taught by Troy Cooley. The Indian pace duo of Zaheer Khan and Ishant Sharma, coached by Venkatesh Prasad, used reverse swing, which enabled India to win the home series against Australia in 2008.

In the early days of reverse swing, Pakistani bowlers were suspected of ball tampering to achieve the conditions of the ball that allow reverse swing, but today they are considered to simply have been ahead of their time.

Normal swing occurs mostly when the ball is fairly new. As it wears more, the aerodynamics of the asymmetry change and it is more difficult to extract a large amount of swing.

When the ball becomes very old—around 40 or more overs old, it can begin to swing towards the polished side rather than the rough side. This is known as reverse swing (Andrew Flintoff and Simon Jones have been known to produce reverse swing in balls as young as 15 overs old). Zaheer Khan and Ishant Sharma of India also managed to get the reverse swing as early as just 8 overs.Umar Gul of Pakistan also managed to get the reverse swing as early as just 12 overs. In essence, both sides have turbulent flow, but here the seam causes the airflow to separate earlier on one side. The result is always a swing to the side with the later separation, so the swing is away from the seam.

Reverse swing is difficult to achieve consistently, as it relies on uneven wear of the ball, tends to occur mostly in hot, dry weather conditions, and requires bowling at high speed. Normal swing can be achieved at relatively moderate bowling speeds, but only the fastest bowlers can regularly produce reverse swing.

Reverse swing tends to be stronger than normal swing, and to occur late in the ball's trajectory. This gives it a very different character from normal swing, and because batsmen experience it less often, they generally find it much more difficult to defend against. It is also possible for a ball to swing normally in its early flight, and then to reverse as it approaches the batsman. This can be done in two ways[citation needed]: one for the ball to reverse in the opposite direction to the original swing, giving it an "S" trajectory; and the other for it to reverse in the same direction making the swing even more pronounced. Either way it can be very devastating for the batsman: in the first instance, he is already committed to playing one way, which is often the wrong way to play swing in the opposite direction; and in the second instance, his stance will have conformed to dealing with the degree of expected swing and could leave him vulnerable to being caught behind, LBW or bowled. Two back to back deliveries from Wasim Akram, one of each type, were considered to be the turning point of the 1992 World Cup Final.

Controversy regarding reverse swing has never left modern cricket, as the Pakistani team was accused of ball tampering by the controversial Australian umpire Darrell Hair during the fourth test against England in 2006 when the ball began to reverse swing after the 50th over.[citation needed] His co-umpire Billy Doctrove fully supported him in this action. A hearing subsequently found that there was insufficient evidence to convict anyone of ball tampering.

Playing swing bowling

Playing swing bowling is considered to be the hallmark of a batsman's skill. While often a batsman will be encouraged to play defensively, in many instances he may be skilled enough to attack.

A batsman often needs to anticipate beforehand what the ball will do and adjust accordingly to play swing bowling. This can be done by observing the bowler's grip and action (which may have a marked difference depending on which type of swinger is to be delivered), by observing the field set, which may depend on the types of deliveries expected (as a rule outswingers will have more slips assigned) or by means of prior knowledge of the bowler; many can bowl or are proficient in only one type of swing.

Since reverse occurs at faster speeds, later in the trajectory of the ball and with no real obvious change in action and grip (Waqar Younis from Pakistan for example had the same action and grip for nearly all his deliveries, batsmen with a quick eye and reflexes will do well. Also, Waqar Younis employed the technique of covering the ball with his hands during his run up to hide the grip. In his autobiography Wasim Akram mentions three batsmen— Brian Lara, Aravinda De Silva, and Martin Crowe —who had such reflexes and who were exceedingly difficult to bowl to.

No comments:

Post a Comment

Popular Posts

VIDYA BALAN